23
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
Switching the Phone On/Off
1. Open the phone.
2. Hold down for more than one second to
switch the phone on.
3. If the phone asks for a CHV code, enter the CHV
code supplied with the UIM card. For further
information on the CHV code, see page xx.
The service light in the top right corner of the
phone flashes, and an alert sounds. When the
system locates services, you can see the following
idle screens on the main and external display
respectively.
If the phone is out of service, the
icon
appears in the display. In this case, you cannot
place and receive calls. You can try again later
when service is available.
Note
: You can change the display language via
the
Language
menu option (
6-5
).
3. When you wish to switch the phone off, hold
down for more than two seconds.
12:20 AM
06/20 M0
22
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
WARNING!
Do not switch on the phone when the mobile
phone use is prohibited or when it may cause
interference or danger.
Note:
Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects call quality and
may cause the phone to operate at a higher power
level than otherwise needed.
Changing the Display for Standby
Mode
Your phone provides you with a variety of items to
display in Standby mode. You can change the idle
screen with ease to one of the following items
depending on your preference.
• Clock and calendar: displays a clock with with a
daily pad calendar. This is default display.
• World clock: displays two clocks showing the time
in the time zones selected in the
World Time
menu option (see page xx).
• Digital clock: displays the digital clock.
• Wallpaper 1 and 2: displays the wallpaper
animations selected in
Idle 1
and
Idle 2
under the
Animation
menu option (see page xx)
respectively.
To change the display in Standby mode, press or
until you find the desired display.
