manualshive.com logo in svg

Samsung SCH-A101, Service Manual, Page: 3 / 57

Share
Download
Samsung SCH-A101 Service Manual Download Page 3

1. General Description

The SCH-A101 cellular phone functions as digital cellular phone working in CDMA (Code Division Multiple
Access) mode.
CDMA type digital mode applies DSSS (Direct Sequential Spread Spectrum) mode which first came to be used
in the military. The DSSS reduces channel cross talk and allow to use one frequency channel by multiple users
in the same specific area, resulting in increase of channel capacity to about ten times compared to that of analog
mode currently used.
Soft/Softer Handoff, Hard Handoff, and Dynamic RF Power Control technologies are combined into this phone
to reduce the call drop while usage.
CDMA digital cellular network consists of MSO (Mobile Switching Office), BSC (Base Station Controller),
BTS(Base Station Transmission System), and MS (Mobile Station). MS meets the specifications of the below:

•

IS-95A : Mobile Station-Base Station Compatibility Standard for Dual-Mode Wideband Spread Spectrum

Cellular System

•

IS-96A : Speech Service Option 1 Standard for Dual-Mode Wideband Spread Spectrum Cellular Systems

•

IS-98A : Standards for Dual-Mode Wideband Spread Spectrum Cellular Mobile Station

•

IS-126 : Mobile Station Loopback Service Options Standard

SAMSUNG Proprietary-Contents may change without notice

1-1

Summary of Contents for SCH-A101


























































Reviews:

No comments