
4. NAM Programming
NAM features can be programmed as follows:
Notes:
- If you enter the NAM program mode, each item shows the currenly stored data. Go to the next item by
pressing .
- You can modify the data by entering a new data.
- If you enter a wrong digit, press CLR to delete the last digit. Press and hold CLR to delete all digits.
- To scroll items backwards or forwards, press the VOLUME button on the left side of the phone.
4-1 General Setup
LCD Display
Key in
Function
47 869#08#9
47 869#08#9
-selects NAM programming
NAM program
1
-choose ‘GENERAL’
1:General
2:Setup NAM1
ESN
Volume
▼
-Electronic Serial Number of the phone
B0000000
CAI version
Volume
▼
-The version of Common Air Interface supported by
3
the mobile
VOC8/13/EVRC
SO_VOIC_EVRC
Volume
▼
-evrc, voice08k, voice13k
SCM
Volume
▼
-Station Class Mark displays the power class(bit0~1),
00101010
transmission(bit2), slotted class(bit5), dual mode(bit6).
Lock Code
(0000)
-Lock code, current ststus is displayed
0000
4-digit code
to change, enter new code.
-store it
Slot Mode
-Slot mode. ‘Yes’ indicates the slot mode.
Yes
<or>
changes the status.
-store it.
Slot Index
-Slot mode index. The higher, the longer sleeping time
2
0-7
to change, enter new one.
-store it.
Pref NAM1...
-Preferred system selection for NAM1
Digital only
changes the system.
-store it.
Pref NAM2...
-Preferred system selection for NAM3
Digital only
changes the system.
-store it.
Pref NAM4...
-Preferred system selection for NAM4
Digital only
changes the system.
-store it.
OK/
OK/
OK/
OK/
OK/
OK/
SAMSUNG Proprietary-Contents may change without notice
4-1
OK/