Samsung SCD80, Service Manual

Page: 40 / 178

Samsung Electronics 4-25
Alignment and Adjustment
4-3. LCD Adjustment (112K)
Notes: For LCD adjustment, use the buttons on the video camera and the remote control.
After each adjustment step is completed, OSD shows "OK".
EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.
After finishing the adjustment, turn power off.
Note: In service adjustment mode, button names are different from those in customer function control
mode.
STEP 1
1. Connect the power source
(battery/DC cable).
2. Set the "CAMERA/PLAYER" switch to
"CAMERA" position.
3. Camera screen and OSD appears.
4. Open housing of the video camera and
remove tape.
5. Open the LCD.
STEP2
1) Press and hold the "EASY" button on the
video camere and "BLC" button on the video
camera at the same time for more than 5
seconds.
When monitor OSD shows as above screen, LCD
adjustment mode has been activated successfully.
Note : "XX" indicates variable values.
1. How to get into the LCD adjust mode.
2. Functions of each button on the Video Camera
Monitor screen
LCD
EPR:XX EVR:XX
01
Description
Button
ENTER (Confirm)
EASY (Mode Up)
CUSTOM (Mode Down)
VOL UP (Data Up)
VOL DOWN (Data Down)
Stores changed value in the adjustment mode.
Shift adjustment address to left.
Shift adjustment address to right.
Down value.
Up value.