ENGLISH
64
64
Advanced Recording
✤
The AUDIO DUBBING function only works in PLAYER Mode.
✤
You can add sound to the original sound on a pre-recorded tape,
recorded in SP mode with 12bit sound.
✤
Use the internal and external microphones or other audio equipment.
✤
The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone,
connect the microphone to the external MIC
input jack on the camcorder.
■
When you wish to dub using the External A/V
input, connect the AUDIO/VIDEO cable to the
camcorder by inserting the AUDIO/VIDEO cable
into the AV Jack at the front side of the
camcorder. (SCD250/D270 only)
-
Press the MENU button, move the MENU
SELECTOR to highlight A/V and push the
MENU SELECTOR.
-
Move the MENU SELECTOR to highlight AV
IN/OUTand push the MENU SELECTOR to
select AV IN.
2. Press the
(PLAY/STILL) button and find the
timeframe of the scene to be dubbed.
3. Press the
(PLAY/STILL) button to pause
the scene.
4. Press the A.DUB button on the Remote
Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state
for dubbing.
5. Press the
(PLAY/STILL) button to start
dubbing.
■
Press the
(STOP) button to stop the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write
protected video tape.
■
You must use the external microphone jack size of below 11.5Ø.
■
When you wish to dub using the External A/V input, you must connect
the AUDIO/VIDEO cable to the audio system from which you wish to
record. (SCD250/D270 only)
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
(SCD230/D250/D270 only)
✤
✤
✤
✤
■
■
■
■
■
■
■
Ø
.
■
■
FADE
BLC
TAPE
/MF
MENU
S.SHOW
AV IN
Audio (R)
Audio (L)
(SCD250/D270 only)
