Samsung SCD250 Owner'S Instruction Manual Download

Page: 24 / 108

ENGLISH

Preparation

Using the Lithium Ion Battery Pack

✤

The amount of continuous recording time available depends on.
-

The type and capacity of the battery pack you are using.

- How often the Zoom function is used.

It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an

AC cord and connect the AC cord to
a wall socket.

3. Connect the DC cable to the DC jack

socket on the camcorder.

4. Turn the Camera power switch to off, and

the charging indicator will start to flash,
showing that the battery is charging.

5. When the battery is fully charged, disconnect the battery

pack and the AC Power adapter from the camcorder.

■

Even with the power switched off, the battery pack will
still discharge if it is left connected to the camcorder.

Notes

■

The battery pack may be charged a little at the time of
purchase.

■

To prevent reduction in the life and capacity of the battery pack,
always remove it from the camcorder after it is fully charged.

✤

■

■
■

Blinking time

Charging rate

Once per second

Less than 50%

Twice per second

50% ~ 75%

Three times per second

75% ~ 90%

Blinking stops and stays on

90% ~ 100%

On for a second and

Error - Reset the battery pack and

off for a second

the DC cable

TAPE

EJECT

VOL

CHARGE

Summary of Contents for SCD250













































































































Search results

Summary of Contents for SCD250

Reviews:

Related manuals for SCD250

Brands by name

Popular brands

Samsung SCD250, Owner'S Instruction Manual

Search results

Summary of Contents for SCD250

Reviews:

Related manuals for SCD250

Brands by name

Popular brands