installation & connection
16_
installation & connection
connectInG WItH otHer DeVIce
connecting to the monitor
Connect the video out port of the camera to the video input port of the monitor.
M
`
To check the display screen after installing the camera for the first time, you can use the C-Video
port to check the video screen.
`
You can set the video output type to either NTSC or PAL. (page31)
`
The C-Video source (4:3) will be displayed with either side truncated in comparison with the
HD-SDI video.
`
The video source from the HD-SDI port can be displayed on the dedicated monitor. To display the
source on a commercial monitor, you need a converter to convert the video signal as appropriate.
3.M
D
_
OU
4.RS_
48
5+
5.RS_
48
5-
GREEN: 485-
YELLOW
: 485+
BLUE: MD_OUT
GRAY: EXT_DN
BLACK: GND
DVR
PC
RS-485
RS2
32C
RS
485
, 42
2
CON
VER
TER
T+
T -
R-
R
+
Test monitor for installation
System Controller
or
Converter
Motion detection output device
Day/Night mode controller
SCD-6021-ENGLISH-131230.indd 16
2014-3-12 15:28:18