32_ setup
setup
INTellIGeNCe:
Commands the camera to motion-detect and trace an object.
MOTION : Select motion types to
detect.
OFF : Not being used.
DETECTION : Since the camera
detects motion without
any additional external
sensor, you can monitor
activity more efficient.
TRACKING : Commands the camera to
detect and trace a moving
object.
▶
FENCE :
You can select up to 4 FENCE.
▶
MODE : Determines whether to use
the fence selected in the
FENCE.
▶
TYPE : Two types, line and area, of
fences are available.
▶
COUNT : Displays the number of times that an object enters or leaves a
fenced area.
▶
FILL : Fill or remove color from the FENCE.
▶
POSITION : Defines the position and detection direction of a line or
fenced area.
1) LINE FENCE
- SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
·
DIR1 : Detects objects moving left to right on the fence line.
·
DIR2 : Detects objects moving right to left on the fence line.
·
DIR1/2 : Detects all objects moving crosswise on the fence line.
-
RETURN : Select this to save the POSITION menu settings and
return to the TRACKING menu.
2) AREA FENCE
- SEL POS : Selects a position from POS1 ~ POS4.
- X POS / Y POS : Adjust the size and position of the selected area fence.
- DIRECTION
·
IN : Detects objects entering the fenced area.
·
OUT : Detects objects exiting the fenced area
-
-
-
-
INTELLIGENCE
▶
1.MOTION OFF
2.DETECT BOX
ON
3.ALARM OUT
OFF
4.DETECT AREA
5.MASK AREA
6.SENSITIVITY
IIIIIIII
IIIIIIIIIIIII
3
7.DET.SIZE
IIIIIIII
IIIIIIIIIIIII
3
8.RETURN
TRACKING
▶
1.FENCE FENCE1
2.MODE
OFF
3.TYPE
LINE
4.COUNT
OFF
5.FILL
OFF
6.POSITION
7.RETURN
SCD-3081-ENG-new.indd 32
2011-2-16 12:13:38
