English
_1
English
Tie up the
SAFETy WIRE
of the
CAmERA
on the
BRACKET WIRE
of the
FRAmE
SET
.
Arrange the
22P CONNECTOR
of the
CAmERA
in line with that of the
ADAPTOR
,
push the
HOOKs
on either end of the
CAmERA
in the
RACK
direction of the
FRAmE SET
to secure the two.
Then, ensure that all of the two
HOOKs
clicks to fix to the
RACK
properly.
When the installation is completed, remove the
PROTECTIVE COVER
and
PRETOECTIVE TAP
E from the lens.
Align each of the 3
SCREWS
of
COvER DOmE
and 3
SCREW HOLE
s of the
HOUSING
respectively, and assemble the
COvER DOmE
and
HOUSING
. During
the assembling, note on the followings.
Insert and arrange
SAFETy WIRE
into the
HOUSING
while not disturbing the
camera operation.
Ensure that the
GASKET DOmE
component does not separate from the
COvER DOmE
. (If the
GASKET DOmE
is not properly assembled, it damages
the waterproofness.)
3.
M
4.
22P CONNECTOR
HOUSING
RACK
RACK
BRACKET WIRE
FRAME SET
SAFETY WIRE
HOOK
HOOK
CAMERA
PROTECTIVE
COVER
PROTECTIVE
TAPE
SCREWS
HOUSING
COVER DOME
COVER DOME
GASKET DOME
CAMERA
HOUSING
SAFETY WIRE
00956B-NA_SCC-C7453N-ENG.indb 15
2009-08-13 오후 10:58:31
