26
– DIGITAL COLOR CAMERA
How to use OSD Menu
OTHER SET
e
OTHER SET
f
EXTERNAL TRG
OFF
FACTORY DEFAULTS
OSD COLOR
BW
EXTERNAL TRG
Set the
EXTERNAL TRG
menu to
ON
and press
the
SETUP
switch to display the appropriate
screen.
EXTERNAL TRG
STILL TIME
OFF
DELAY TIME
FIX
You can set the
STILL TIME
to 0~4 seconds.
If
DELAY TIME
is set to
FIX
, the
DELAY TIME
will
be set in sync with the
STILL TIME
; if set to
USER
,
the
DELAY TIME
will be set to your setting.
Note
:
If
VPS
is set to
OFF
, the
EXTERNAL TRG
menu will be
deactivated.
FACTORY DEFAULTS
All the settings will be restored to the factory
default.
However, the settings of
PROTOCOL
,
BAUD
RATE
,
ADDRESS
and
LANGUAGE
will not be
restored to the default.
OSD COLOR
[BW, R/G/B]
You can set the OSD(On-screen Display) color to
COLOR or B/W.
❖
–
❖
❖
COMMUNICATION
e
COMMUNICATION
f
RS-485
PROTOCOL
SAMSUNG
BAUD RATE
9600
ADDRESS
0
The
COMMUNICATION
menu is used to confi gure
the settings regarding RS-485 communications.
Use the rear panel of the camera to connect to
RS-485.
[Camera I/O Connector]
Use the
cdef
switch to specify the protocol,
baud rate and address (0~255) for communications.
PROTOCOL
Select a communication protocol.
BAUD RATE
Select a baud rate.
Note
:
The baud rate differs, depending on the specifi ed
protocol.
ADDRESS
[0~255]
You must specify a unique address for each
camera in the same RS-485 network.
To control a specifi c camera, you must match the
address of the camera with that of the DVR or the
controller.
❖
❖
–
❖
SYS
You
proto
versi
LAN
The c
Selec
