Thermal Night Vision Camera
User Guide
26
Thermal Night Vision Camera
User Guide
27
MAIN SETUP
1. BRIGHTNESS
AUTO
2. CONTRAST
MANUAL
3. RANGE
AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
9. EXIT
TEMP ADJ :
Use this option to change the temperature unit. Press the button while the cursor is aligned
with "4.TEMP ADJ" to change temperature display on/off and temperature unit
℃/℉
.
Use this option to save device settings and establish the basic settings which will be used the next
time you start up the device. Press the SET button while the cursor is aligned with “8. SAVE” to
record your current settings to the internal memory. If you exit without saving, the MAIN SETUP
menu will close without any values being updated.
… …
-
Camera ID(ID Display Setting) :
Use this option to adjust the display setting of the currently set Camera ID (appears on the
top left of the screen).
Press the LEFT button or RIGHT button while the cursor is aligned with “5. DISPLAY ID” to
switch the CAMERA ID display setting from: ON
⇒
OFF
⇒
ON. Select “6. RETURN” to confirm
the current setting and go back to the SPECIAL SETUP menu screen. (Default value: OFF)
Operating the Camera
SAVE
…
TV SYSTEM (Video Output Setting) :
Use this option to adjust the video output setting.
Press the LEFT button or RIGHT button while the cursor is
aligned with “1. TV SYSTEM” to switch the TV SYSTEM
setting from: NTSC
⇒
PAL
⇒
NTSC. Select “6. RETURN”
to confirm the current setting and go back to the MAIN
SETUP menu screen. (Default value: NTSC)
…
COMM ADJ (Communication Settings mode) :
Use this menu to adjust communication settings.
Press the SET button while the cursor is aligned with “3.
COMM ADJ” in the SPECIAL SETUP menu to display the
following sub menu.
…
- CAMERA ID (Camera ID Settings) :
Use this option to adjust CAMERA ID settings.
Press the LEFT button or RIGHT button while the cursor is aligned with “1. CAMERA ID” to
adjust the CAMERA ID setting to a value from 0-255. The adjusted value will become valid
when the setting is saved. Select “6. RETURN” to go back to the SPECIAL SETUP menu
screen. (Default value: 0)
… …
-
BAUD RATE (Communications Speed Settings Mode) :
Use this option to change the BAUD RATE to one of four settings: 38,400 bps, 19,200 bps,
9600 bps, 4800 bps. Press the LEFT button or RIGHT button while the cursor is aligned with
“2. BAUD RATE” to switch the BAUD RATE setting from: 4800
⇒
9600
⇒
19,200
⇒
38,400
⇒
4800. Select “6. RETURN” to confirm the current setting and go back to the SPECIAL
SETUP menu screen. (Default value: 9600 bps)
… …
- UART MODE (Parity Settings Mode) :
Use this option to adjust parity settings.
Press the LEFT button or RIGHT button while the cursor is aligned with “3. UART MODE” to
switch the UART MODE setting from: 8-E-1
⇒
8-O-1
⇒
8-N-1
⇒
8-E-1. Please note that
both the bit length (8) and the stop bit (1) are fixed. Select “6. RETURN” to confirm the
current setting and go back to the SPECIAL SETUP menu screen. (Default value: 8-E-1)
… …
-
RET PKT (Return Packet Setting) :
Use this option to adjust the return packet (returned using the same status as the data
entered) setting.
Press the LEFT button or RIGHT button while the cursor is aligned with “4. RET PKT” to
switch the RET PKT setting from: ON
⇒
OFF
⇒
ON. Select “6. RETURN” to confirm the
current setting and go back to the SPECIAL SETUP menu screen. (Default value: ON)
SPECLAL SETUP
▶ 1.TV SYSTEM
PAL
2.LANGUAGE
ENGLISH
3.COMM ADJ
4.TEMP ADJ
5.RESET
6.RETURN
COMM ADJ
1.CAMERA ID
1
▶ 2.BAUDRATE
9600
3.UART MODE
8-E-1
4.RET PKT
ON
5.DISPLAY CAM ID OFF
6.RETURN
• Don't use SCB-9050/9051 to detect anything. Measurement error is
±
15
°C
for objects
that have 0~100
°C
.
Notes
…
RESET (Reset) :
Use this option to restore each item to its default setting.
Press the SET button while the cursor is aligned with “5. RESET” to restore each item to its
factory default setting. Please note, however, that neither TV SYSTEM nor COMM ADJ can be
changed. Select “6. RETURN” to go back to the SPECIAL SETUP menu screen.
