Samsung SCB-9050, User Manual

Page: 11 / 19

Thermal Night Vision Camera User Guide
20
Thermal Night Vision Camera User Guide
21
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
Operating the Camera
BRIGHTNESS
CONTRAST
1. Press the SET button while the cursor is aligned with “1.
BRIGHTNESS” to display the BRIGHTNESS sub menu shown
below. Press the LEFT button or RIGHT button while the cursor is
aligned with “AUTO” to switch the BRIGHTNESS AUTO ADJUST
setting from : ON
…⇒…
OFF
…⇒…
ON.
Press the LEFT button or RIGHT button while the cursor is aligned
with “MANUAL” to adjust the BRIGHTNESS over ten different
levels: 1
⇒ 2 ⇒… 3 ⇒ 4 ⇒ 5 ⇒ 6 ⇒ 7 ⇒ 8 ⇒ 9 ⇒… 10 ⇒…
1. Select “2. RETURN” to confirm the current setting and go
back to the MAIN SETUP menu screen. (Default value : AUTO ON)
2. Press the SET button while the cursor is aligned with “2.
CONTRAST” to display the following sub menu. Press the LEFT
button or RIGHT button while the cursor is aligned with “AUTO”
to switch the CONTRAST AUTO ADJUST setting from : ON
⇒
OFF
⇒
ON.
BRIGHTNESS
▶ 1.MANUAL 5
2.RETURN
CONTRAST
▶ 1.MANUAL 6
2.RETURN
Function settings may be adjusted using the internal switches after removing the rear
cover. (Refer to “5. Interface” for directions on how to remove the rear cover.)
UP button
: Move the menu cursor up.
RIGHT button : Increase (+) the settings value of the selected item.
DOWN Key : Move the menu cursor down.
LEFT button : Decrease (-) the settings value of the selected item.
SET button : If a “ ” icon is displayed: Move to a screen where you can select settings
values (move down a level)
If a “ ” icon is not displayed: Execute or adjust the selected item
Press the SET button to display the MAIN SETUP menu screen. The MAIN SETUP menu
uses a tree structure. When you select a function, a sub menu will appear.
UP
SET (Push)
RIGHT
DOWN LEFT
< Control buttons >
Function Settings Methods
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
9. EXIT
Use the UP button or DOWN
button to select the item you
would like to set. Use the RIGHT button or LEFT
button to change the status of
the corresponding setting.