background image

safety information 

_03

safety information

important SafEGuardS

1. 

Read all instructions carefully. Before switching on, make sure that the voltage 
of your electricity supply is the same as that indicated on the rating plate on the 
bottom of the cleaner.

2. 

WARNING :  Do not use the vacuum cleaner when rug or floor is wet. 

Do not use to suck up water.

3. 

Do not use the vacuum cleaner without a dust bin. 
Empty the dust bin before it is full in order to maintain the best efficiency.

4. 

Slide to the Stop(or Min)position before inserting a plug into the electrical outlet.

5. 

Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts.

 

Keep the vacuum cleaner away from stoves and other heat sources. Heat can 
deform and discolour the plastic parts of the unit.

6. 

Avoid picking up hard, sharp objects with the vacuum cleaner as they may 
damage the cleaner parts. Do not stand on the hose assembly. Do not put 
weight on the hose. 
Do not block the suction or the exhaust port.

7. 

Switch the vacuum cleaner off on the body of the machine before unplugging 
from the electrical outlet. Disconnect the plug from the electrical outlet before 
changing the dust bag or dust container. To avoid damage, please remove the 
plug by grasping the plug itself, not by pulling on the cord.

8. 

This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

9. 

Children should be supervised to ensure that they do not play with the appliance.

10. 

The plug must be removed from the socket outlet before cleaning or maintaining 
the appliance.

11. 

The use of an extension cord is not recommended.

12. 

If your vacuum cleaner is not operating correctly, switch off the power supply and 
consult an authorized service agent.

13. 

If the supply cord is damaged, it must be replaced by the manufacturer or its 
service agent or a similarly qualified person in order to avoid a hazard.

14. 

Don’t carry the vacuum cleaner by holding the hose. 
Use the handle on the vacuum cleaner set.

15. 

Unplug the cleaner when not in use. Turn off the power switch before unplugging.

DJ68-00532A-01.indd   3

2010.10.8   9:38:58 AM

Summary of Contents for SC4770 ( 7)

















Reviews: