background image

viii_

English

29.

 To prevent damage which may result in fire or shock 

hazard, do not expose this appliance to rain or 

moisture.

30.

 If this power supply is used at 240V ac, a suitable 

plug adapter should be used.

31.

 This product is covered by one or more of the 

following U.S. patents:

 

5,060,220 5,457,669 5,561,649 5,705,762 5,987,417

 

6,043,912 6,222,983 6,272,096 6,377,524 6,377,531

 

6,385,587 6,389,570 6,408,408 6,466,532 6,473,736

 

6,477,501 6,480,829 6,556,520 6,556,521 6,556,522

 

6,578,163 6,594,208 6,631,110 6,658,588 6,674,697

 

6,674,957 6,687,455 6,697,307 6,707,985 6,721,243

 

6,721,493 6,728,474 6,741,535 6,744,713 6,744,972

 

6,765,853 6,765,853 6,771,890 6,771,891 6,775,465

 

6,778,755 6,788,629 6,788,630 6,795,637 6,810,201

 

6,862,256 6,868,054 6,894,963 6,937,552

USER INSTALLER CAUTION:

Your authority to operate this FCC certified equipment could 

be voided if you make changes or modifications not expressly 

approved by this party responsible for compliance to part 15 
FCC rules.
NOTE:
Hg    LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND 

MUST BE RECYCLED OR DISPOSED OF ACCORDING 

TO LOCAL, STATE OR FEDERAL LAWS. For details see 
lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864)

NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. 

These limits are designed to provide reasonable protection 

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that 

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the equipment and 

receiver.

-  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

-  Consult the dealer or an experienced radio/TV technician 

for help and for additional suggestions.

 

The user may find the following booklet prepared by the 

Federal Communications Commission helpful : “How to 

Identify and Resolve Radio-TV Interference Problems.”

 

This Booklet is available from the U.S. Government 

Printing Office, Washington, D.C. 20402, Stock No. 

004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not 

expressly approved by the manufacturer could void the user’s 

authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions;

(1)  This device may not cause harmful interference, and

(2)  This device must accept any interference received, 

including interference that may cause undesired operation.

CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR

(Manganese Dioxide) Lithium coin cells in the product sold

or distributed ONLY in California USA

“ Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

important safety instructions

Summary of Contents for SC MX10 - Camcorder - 680 KP













































































































Reviews: