Samsung SC-DC164 Page 101 Owner'S Instruction Manual Download

Page: 101 / 136

Photo capture

ENGLISH

Digital Still Camera Mode

Taking a Photo Image (JPEG) on the Memory Card



You may take photo images while in

M.Cam

Mode

and store the images on the Memory Card.



page 26



You can take photo images using the remote control.(SC-DC164/DC165 only)



Audio will not be recorded with a photo image on to the Memory Card.



Please check the protection tab setting on your memory card before recording. You may not be able to record when it is set

to lock.

1. Insert the Memory Card.
2. Set the

[Mode]

switch to

[CARD]

3. Set the

[Power]

switch to

[

(Camera)]

4. After framing your object to record, fully press the

[PHOTO]

button to take the picture.



The picture is taken and saved into the Memory Card within a few seconds.



Taking another picture within this interval is not possible.



The

<Photo capture>

indicator appears during the time it takes to save the image.

Notes



Photo images are saved in the Memory Card in an 800x600 format.



The number of photo images that can be stored depends on the quality of the image.

Summary of Contents for SC-DC164









































































































































Search results

Summary of Contents for SC-DC164

Reviews:

Related manuals for SC-DC164

Brands by name

Popular brands

Samsung SC-DC164, Owner'S Instruction Manual

Search results

Summary of Contents for SC-DC164

Reviews:

Related manuals for SC-DC164

Brands by name

Popular brands