Samsung SC-D70, Service Manual

Page: 24 / 115

Samsung Electronics 3-1
3. Alignment and Adjustment
3-1. VCR Adjustment
3-1-1. VCR Adjustment Preparation
1. How to get into the VCR adjust mode.
STEP 1
1. Connect the power source.
2. Set the mode switch of the video camera to
"PLAYER" position.
3. Insert standard tape into the video camera and
set to "PLAY" position.
4.Press the "PLAY" button on the video camera or
the remote control
STEP 2
1. Press and hold the "F.ADV" button on the
remote control and "ENTER" button on the
video camera at the same time for more than 10
seconds.
2. When monitor OSD appears as shown below,
VCR adjustment mode has been activated suc-
cessfully.
3. When changing the adjustment item after the
adjusted value is designated, press the
"START/STOP" button.
NO MODE EVR EPR
1 V-REF 79H 79H
SP PLAY
0:00:00:01
S64 LOO
01 01380
Indicates preset values
Indicates the adjusted values
Indicates current adjustment item.