Samsung SC-D6040 Owner'S Instruction Book Download

Page: 62 / 169

ENGLISH

The Camcorder : Advanced Recording

Selecting a Digital Special Effect in Camcorder Mode

1. Turn your camcorder on by setting the Power Switch to REC mode.

2. Press the MENU button.

The top menu including CAMERA is displayed.

3. Press the DOWN button to select CAMERA , then press the OK button.

The submenu including DSE SELECT is displayed.

4. Press the DOWN button to select DSE SELECT , then press the OK button.

The available DSE SELECT options are listed.

5. Select you option by pressing the DOWN or UP button, then press the OK button.

The selected option is applied.

6. Press the MENU button to exit the menu screen.

✤

DSE and NITE PIX cannot be used at the same time.

✤

DSE mode is not available in EASYQ mode.

✤

The selected DSE mode can be accessed through the Quick Menu by using the Navigation
Wheel (refer to Quick Menu on page 68).

Notes

Summary of Contents for SC-D6040










































































































































































Search results

Summary of Contents for SC-D6040

Reviews:

Related manuals for SC-D6040

Brands by name

Popular brands

Samsung SC-D6040, Owner'S Instruction Book

Search results

Summary of Contents for SC-D6040

Reviews:

Related manuals for SC-D6040

Brands by name

Popular brands