Playback
✤
You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Multi-AV cable.
■
The yellow jack: Video
■
The white jack: Audio(L) - Mono
■
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the
Power
switch to
PLAYER
.
4. Set the
Mode
switch to
TAPE
.
5. Turn on both the TV and VCR.
■
Set the input selector on the VCR to
Line.
■
Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
✤
You can play the recorded tape in Player mode.
1. Connect a power source and set the
Power
switch
to
PLAYER
.
2. Set the
Mode
switch to
TAPE
.
3. Insert the tape you wish to play back.
4. Using the
/
(REW/FF) buttons, find the first
position you wish to play back.
5. Press the
(PLAY/STILL) button.
■
The images you recorded will appear on the TV after a few
seconds.
■
If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
■
The playback mode (SP/LP) is determined by the mode in which
the tape was recorded.
■
If the VCR has an S-Video input terminal, you may use S-Video
Connector for better quality.
■
The S-Video Connector transmits video only. Connect Audio cables
for sound.
■
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
Playback
ENGLISH
71
71
✤
1.
■
Video
■
Audio L [
]-
■
Audio R [
]
2.
3.
PLAYER
4.
TAPE
5.
■
Line
■
6.
✤
Player
1.
PLAYER
2.
TAPE
3.
4.
/
REW/FF
/
5.
PLAY/STILL
/
■
■
■
SP/LP
/
■
S-Video
S-Video
■
S-Video
■
Audio L
DV
USB
AV/
S
Antenna
S-Video input
TV
VCR
Camcorder
Video input-Yellow
Audio input(left)-White
Audio input(right)-Red
Audio/Video/
S-Video
