English _
39
SELFRECORDUSINGTHEREMOTECONTROL(SETTINGTHESELFTIMER)
(SC-D382/D385only)
The SELF TIMER function works only in
Camera
mode.
➥
page 18
When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1.
Set the
Select
switch to
TAPE
. (SC-D385 only)
2.
Press the
MODE
button to set
Camera
(
).
3.
Press the
SELF TIMER
button.
The ( ) indicator is displayed.
4.
To record movie images, press the
Recording start/stop
button.
Self timer starts counting down from 10. At this moment, recording indicator
blinks with a beep sound.
At the last second of the countdown, recording starts automatically.
If you want to cancel the self timer function before recording, press the
SELF TIMER
button again.
Do not obstruct the remote control sensor by putting obstacles between
the remote control and miniDV camcorder.
The remote control maximum range is 4 to 5m (13 to17 ft).
The effective remote control angle is up to 30 degrees left /right from the
center line.
Using a tripod (not supplied) is recommended during self record.
•
•
•
•
•
•
•
•
•
•
BATT.
CHG
MODE
TAPE
CARD
16BIt
S
10Sec
C.Nite 1/30
60min
0:00:30
SP
STBY
10Sec
16:9 Wide
(SC-D385 only)
