Samsung SC-D381 User Manual Download Page 29

Page: 29 / 115

English _

USINGTHEDISPLAY(

)BUTTON

You can switch between the on-screen information display modes: Press the

Display

(

) button.

Switching the information display mode

You can switch between the on-screen information display modes:

Press the

Display

(

) button.

The full and minimum display modes will alternate.

Full display mode: All information will appear.

Minimum display mode: Only operating status indicators will appear.

Checking the remaining battery

Press and hold the

Display

(

) button while charging with the power off.

After a while, the charging status will be displayed on the LCD screen for

7 seconds.

The battery charge status is given as reference and is an estimation.

It may differ depending on the battery capacity and temperature.

•

BATT.

MOD

POWE

CHG

Battery Info

Battery charged

50%

100%

Summary of Contents for SC-D381




















































































































Search results

Summary of Contents for SC-D381

Reviews:

Brands by name

Popular brands

Samsung SC-D381, User Manual

Search results

Summary of Contents for SC-D381

Reviews:

Brands by name

Popular brands