Samsung SC-D103, Service Manual

Page: 7 / 99

Alignment and Adjustments
2-3
Samsung Electronics
2-2 Camera Adjustmant
Note : How to adjust the camera system.
1) EEPROM stores confirmed adjustment value of each adjustment step.
2) DSP (Digital Signal Process : ICA01-Main PCB) digitalizes the camera signal.
3) When changing IC705-Main PCB of EEPROM, readjust Main PCB.
While changing LCD PCB and CVF PCB- always readjust each part.
Since EEPROM stores confirmed adjustment value of each adjustment step, readjusting must be performed in order
to store the changed data.
4) Adjust the following items after changing LENS Ass’y.
Œ
Lens Zoom Track
´
Auto HALL
ˇ
Auto IRIS
5) Adjust the following items after changing EEPROM and Camera Main PCB.
Œ
Lens Zoom Track
´
Zoom VR Center
ˇ
Auto HALL
¨
Auto IRIS
ˆ
Auto White Balance (indoor)
Ø
Auto White Balance (outdoor)
2-2-1 Adjustment Preparation
1) Before you start
ΠUse the buttons on the SET key when adjusting Camera.
´ When changing the adjustment item, please press the “EASY-Q” and “DISPLAY” buttons on the Set.
ˇ You can change the adjustment value to move the “MENU Dial” Up or Down.
¨
Press the push the “ENTER button” when storing confirmed adjustment value of each adjustment step in
EEPROM.
ˆ The OSD shows “OK” after finishing each adjustment step.
Ø To clear the adjustment mode, pull out the power source.
2) Function of each buttons on the Sst Key
Buttons Description
ENTER BUTTON (Confirm) Stores changed value in the adjustment and auto adjustment mode.
MENU Dial down (Data Down)
Changes data in the adjustment state.
MENU Dial up (Data Up)
EASY-Q (Mode Up)
Changes mode.
DISPLAY (Mode Down)
<Table 2-3>