Samsung SC-D103, Service Manual

Page: 6 / 99

2-2
Alignment and Adjustments
Samsung Electronics
[STEP 2]
ΠPress and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´ When monitor OSD appears as shown Fig. 2-2, the adjustment mode has been activated successfully.
ˇ
Move the “MENU Dial” to highlight VCR ADJ and push the “MENU Dial”.
¨ Monitor OSD shows Fig. 2-3.
Then VCR adjustment mode has been activated successfully.
[STEP 3]
If you want to finish the adjustment mode, you have to do Power Reset.
The Power Reset means that you pull out the power source and pull in it again.
Fig. 2-2
ADJ ITEM
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
VCRADJ EPR
600 00
EVR
00
Indicates current adjustment item
Indicates the adjusted values
Indicates preset values
Fig. 2-3
2-1-2 VCR Adjustment
ΠGet into VCR ADJUST mode.
´ Move to the VCR ADJUST address “620”.
ˇ Play standard tape, and “Head Switching Position” will be adjusted automatically.
Mode(Address) Name Value Description
620 SWP Position 80 Head Switching Position Adjust
<Table 2-2>