Samsung S5PC100X, User Manual

Page: 7 / 52

SMDK-C100_USER’S MANUAL_REV 0.2
1 INTRODUCTION
1.1 SYSTEM OVERVIEW
SMDK_C100 (S5PC100 Development Kit) is a platform for code development of SAMSUNG's
S5PC100X 16/32-bit RISC microcontroller (ARM-CORTEX A8). S5PC100X is used in hand-held
devices and general applications.
S5PC100 is a 32-bit RISC cost-effective, low power, high performance microprocessor solution
for mobile phones and general applications, and integrates an ARM CortexTM-A8 which
implements the ARM architecture V7-A with supporting numerous peripherals.
To provide optimized Hardware (H/W) performance for the 3G and 3.5G communication services,
S5PC100 adopts 64-bit internal bus architecture and includes many powerful hardware
accelerators for tasks such as motion video processing, display control and scaling. Integrated
Multi Format Codec (MFC) supports encoding and decoding of MPEG-1/2/4, H.263, H.264 and
decoding of VC1, Divx. This Hardware accelerators support realtime video conferencing and
Analog TV out, HDMI for NTSC and PAL mode
The S5PC100 has an optimized interface to external memory capable of sustaining the
demanding memory bandwidths required in high-end communication services. The memory
system has Flash/ ROM external memory ports for parallel access and DRAM port for high
bandwidth. DRAM port can be configured to support mobile DDR, DDR2 or LPDDR2.
Flash/ ROM Port supports NAND Flash, NOR-Flash, OneNAND and ROM type external memory.
To reduce total system cost and enhance overall functionality, S5PC100 includes many hardware
peripherals such as TFT 24-bit true color LCD controller, Camera Interface, MIPI DSI, CSI-2 and
HSI, System Manager for power management, CF+, ATA I/F, 4-channel UART, 24-channel DMA,
4-channel Timers, General I/O Ports, 3-ch IIS, 1-ch S/PDIF, 2-ch CAN bus, IIC-BUS interface, 3-
ch HS-SPI, USB Host v1.1, USB OTG v2.0 operating at high speed (480Mbps), SD Host & High
Speed Multi-Media Card Interface and PLLs for clock generation.
Package on Package (POP) option with MCP is available for small form factor applications.
Salient features of S5PC100 are summarized below:
The SMDK_C100 consists of S5PC100X, bootable (NAND, OneNAND, NOR FLASH), LCD
interface, two serial communication ports, configuration switches, JTAG interface, status LEDs
and etc.
Note :
BSP(Board Support Package) Installation Guide is offered on the form of separated
materials. Please contact to Samsung FAE.