- 19 -
Connections
Using various connectors, you can also connect external devices.
Read below before connecting the product.
1. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations
of the ports on the product and external device.
2. Before connecting the product, make sure you remove the power cables from both the product and the external device to
prevent damage to the product due to a short circuit or over current.
3. After all signal cables have been properly connected, connect the power cables back to the product and the external
device.
4. After connecting is completed, make sure you read the manuals to acquaint yourself with the product functions,
precautions and other information required to use the product properly.
Connecting the product to the One Connect
"
The product turns off when the One Invisible Connection cable is disconnected, and turns on when it is connected.
●
Do not use the One Connect Box in the upside-down or upright position.
●
Take care not to subject the cable to any of the actions below. The One Connect Cable contains a power circuit.
Bending
Twisting
Pulling
Pressing on
Electric shock
Providing proper ventilation for your Product
When you install your product and One Connect Box, maintain a distance of at least 10 cm between the One Connect Box with
other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.
Ports
"
The functions available may vary depending on the product model. The colour and shape of parts may differ from what is
shown. Specifications are subject to change without notice to improve quality. Refer to the actual product.
