Samsung S3C2410, Installation Manual, Page: 17 / 43

S3C2410/ Mobile Solution Group / IM-1.1-04-05
Mobile Solution Group, System LSI.I Property of Samsung Electronics Co., Ltd. 11
Push ‘F’ key for setting up ‘Hardware Flow Control’ to ‘NO’.
Push ‘G’ key for setting up ‘Software Flow Control’ to ‘NO’. The default value is ‘NO’.
Figure 4-4 Hardware/Software Flow Control Setup
Once setting is over, please press ‘Enter’ key. And select ‘Save setup as dfl’ item, then press ‘Enter’
for saving the values.
Figure 4-5 saving Minicom Setup
Push ‘Exit’ key, to exit from the setting mode. Currently, the set points are stored to the file
‘/etc/minirc.dfl’.