Samsung S27A60U Series User Manual Download

Page: 37 / 47

Installing the Software

Chapter 05

Easy Setting Box

enables users to use the product by partitioning multiple sections.

To install the latest version of

Easy Setting Box

, download it from the Samsung website (http://www.

samsung.com).

―

The software may not work properly if you do not restart the PC after the installation.

―

The

Easy Setting Box

icon may not appear depending on the PC system and the product specifications.

―

If the shortcut icon does not appear, press the F5 key.

Restrictions and Problems with the Installation

The

Easy Setting Box

installation may be affected by the Graphics Card, Motherboard and the

Networking Environment.

System Requirements

Hardware

•

Windows 7 32Bit/64Bit

•

Windows 8 32Bit/64Bit

•

Windows 8.1 32Bit/64Bit

•

Windows 10 32Bit/64Bit

•

At least 32MB of memory

•

At least 60MB of free space on the hard disk drive

Driver Installation

To install the latest version of the product driver, download it from the Samsung website (http://www.
samsung.com).

―

You can set the optimum resolution and frequency for this product by installing the corresponding drivers.

Summary of Contents for S27A60U Series
















































Search results

Summary of Contents for S27A60U Series

Reviews:

Related manuals for S27A60U Series

Brands by name

Popular brands

Samsung S27A60U Series, User Manual

Search results

Summary of Contents for S27A60U Series

Reviews:

Related manuals for S27A60U Series

Brands by name

Popular brands