8
5
6
1
2
3
7
4
9
Chapter 02
Preparations
Put the stand base onto the stand neck as
the direction shown in the figure. Check
that the stand neck is firmly connected.
Tightly fasten the connecting
screw at the bottom of the
stand base.
Disassemble the decoration cover. Attach the decoration cover in the direction of
the arrow and turn it in clockwise according to the mark.
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
Installation
Installation
Installation
AAAttaching the Stand
ttaching the Stand
ttaching the Stand
Caution
Do not arbitrarily remove the panel film.
If not observed, the warranty service may
be restricted.
Stand up the monitor as
shown in the figure.
After installing the stand,
place the product upright.
