4
Ⅰ. SPECIFICATION
1. CAMERA SPECIFICATION
Image Sensor
- Type : 1/1.8" CCD
- Effective Pixel : Approx.10.1 Mega-pixel
- Total Pixel : Approx. 10.3 Mega-pixel
Lens
- Focal Length : SHD Lens f = 7.8~39mm (35mm film equivalent : 38~190mm)
- F No. : Wide : 2.8~7.4
Tele : 4.5~11.7
- Digital Zoom :
·
Still Image mode : 1.0X ~ 5.0X
·
Play mode : 1.0X ~ 14.3X (depends on image size)
LCD Monitor
- 3.0" color TFT LCD (230,000 dots)
Focusing
- Type : TTL auto focus (Multi AF, Center AF, Face Recognition AF)
- Range
Shutter
- Shutter Speed : 1 ~ 1/2,000sec. (Manual : 16 ~ 1/2,000 sec.)
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center weighted, Face Recognition
- Compensation :
±
2EV (1/3EV steps)
- ISO Equivalent : Auto, 80, 100, 200, 400, 800, 1600
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : Wide : 0.2m ~ 3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO)
- Recharging Time : Approx. 5 sec.
Sharpness
- Soft+, Soft, Normal, Vivid, Vivid+
Color Effect
- Normal, B&W, Sepia, Red, Green, Blue, Negative, User Set
White Balance
- Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
Voice Recording
- Voice Recording (max.10 hour)
- Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
- Date, Date & Time, Off (user selectable)
Wide
Tele
Normal
80cm ~ Infinity
1.5m ~ Infinity
Macro
10cm ~ 80cm
50cm ~ 1.5m
Auto Macro
1cm~10cm (Wide Only)
Super Macro
10cm ~ Infinity
50cm ~ Infinity
Manual Focus
1cm ~ Infinity
50cm ~ Infinity
Summary of Contents for S1050 - Digital Camera - Compact
