83
3
Tracking will start.
You cannot use any other function while in tracking.
It may take maximum 3 minutes and 30 seconds for tracking depending on
the amount of information on the device.
4
Check the tracking result.
Result will show connected device and the indoor unit information.
Only in Tracking result and [Individual detailed information] under
[View DVM information], you can check the tracking result of indoor unit
which is not using centralized controller. It is not displayed in [Indoor unit
control], [Zone management] and [Schedule management] menu.
5
Tap [OK].
System will be configured with new information.
To disregard the tracking result, tap [Cancel].
Tracking (Continued)
5
Be aware that when tracking is in progress, some of the information can get
missing.
When the tracking result is incorrect or does not show, check the communication
status or communication device selection.
It may take maximum 3 minutes and 30 seconds for tracking depending on the
amount of information on the device.
If you select [Cancel] to avoid applying the tracking result, new installation
information will not be applied. In this case, actually installed indoor units and the
indoor units’ information that S-NET mini has may not match each other. If the
installation information is not equal, proper operation may not be possible.
Caution
MST-S3W_IB_E_30577-3.indd 83
2011-07-26 오전 9:47:59
Summary of Contents for S-NET mini MST-S3W
Page 112: ......