11
TWIST ICE MAKER
Making Ice Cubes
1
Remove the ice cube tray by pulling it towards you.
`
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3
Slide the tray back into the holder, taking care not to spill the
water.
4
Wait until the ice cubes are formed.
Freezing time:
It is recommended that you wait for about one
hour with the temperature set to QUICK
FREEZING for the ice cubes to form.
Removing the Ice Cubes
1
Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
`
2
Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result:
The ice cubes fall into the storage bin.
3
Repeat Step
2
for the other half of the tray, if necessary.
4
Remove the storage bin by:
◆
Lifting it slightly
◆
Pulling it towards you
MOVABLE ICE TRAY
Making ice cubes
1
Remove the ice cube tray by pulling it towards you.
`
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3
Place it under the freezer shelf or on the freezer shelf .
Removing the ice cubes
To remove ice cubes, hold the tray at its ends and twist gently.
GB
Making Ice Cubes (OPTION)
DA99-00478A 3/21/03 2:17 PM Page 11
Summary of Contents for RT40MBSW
Page 16: ......
