Installation
English
36
Installation
STEP 8
Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Philips screwdriver
Flat-heat
screwdriver
Socket spanner
(10 mm)
Allen spanner
(5 mm)
Disconnect the water line (applicable to dispenser- and home bar-featured models only)
1.
Open the doors, and locate the screws
(x3) on the
foot cover
at the bottom of
the refrigerator.
2.
Remove the screws, and then remove
the
foot cover
.
3.
Pull out the water line to the front.
NOTE
The refrigerator’s water line is a water
circulation line that connects between the
water pipe from the water source and the
hoses from the water filtering system of
the refrigerator.
Untitled-1 36
2016-03-08 2:30:57