Installation
English
34
Installation
STEP 7
Connect the water dispenser line (applicable models only)
Before installation (CoolSelect models only)
1.
Remove any residual matter inside the purifier.
2.
Turn the main water supply on.
3.
Run an approximate 3 litres of water through the dispenser for flushing reasons.
The water may look dark or ice may come out until the flushing is complete, which is
normal.
Parts and tools required
Water line fixer and screws
Pipe connector
Water line
Purifier lock-clip
Purifier
Installation (external dispenser line)
1.
Assemble the water pipe line using
couplers
.
2.
Close the main water supply, and then
close the water tap.
3.
Connect the
coupler
to the cold water
tap.
CAUTION
• Make sure you connect the
coupler
to the cold water tap. Connection to the hot water
tap may cause the purifier to be clogged and fail to operate normally.
• The warranty for your refrigerator does not cover the water line installation. The
water line installation will be performed at your own costs unless the installation fee is
included in the retailer’s price.
• Samsung takes no responsibility for the water line installation. If water leaks occur,
contact the installer of the water line.
• The water line must be repaired by a qualified professional. If you encounter a water
leak, contact a local Samsung service centre or the installer of the water line.
Untitled-1 34
2016-03-08 2:30:56