English
Handle replacement
Model name looks like this:
RS54**3****, RS52**3****, RS50**3****,
What replaces the
asterisks may differ depending the model.
Asterisk(s) in the model code indicate a variant model and may replace (0-9) or (A-Z) in
the model code.
CAUTION
•
When replacing the door handle, take care not to scratch the front of the door.
•
Firmly press the handles at the supports. Make sure there is no gap between the supports
and the door.
•
Tightly fasten the screws when attaching the handle.
•
Check that the handle is firmly attached before using the product.
Tools required (not provided)
Philips screwdriver
Flat-head
screwdriver
To detach the handles
NOTE
This procedure applies to both the fridge and freezer compartment.
RB7300T_User-servicing-manual_EN.indd 3
10/15/2020 3:39:19 PM
1.Handle Assemblies are located on
the front of>the refrigerator door.
2.Insert the small flat-head driver to the
hole>at the bottom of Cap support
handle and>pull the handle assembly
out to the front>side with turning driver
to one side.
Turn around the Handle assembly
to>one side to dissemble about
the bottom>position