Samsung RM25JWSH Owner'S Manual And Installation Download

Page: 13 / 40

OPERA

TING INSTR

UCTIONS

REMOVING THE FREEZER ACCESSORIES

•

Do not use excessive force when
removing the cover. It may cause an injury.

Tray Shelf (optional)

•

Pull the shelf out as far as
it goes. Then lift it up and
remove it.

Door Bin

•

Hold the door bin with both
hands and then lift it up.

Drawer

•

Remove the drawer by
pulling it out and slightly lift-
ing it up.

Ice Bucket

•

Remove the bucket by
lifting it up and pulling it
out.

Front Leg Cover

•

Remove two screws.

•

Lift it up and pull the cover off.

•

To reattach the front leg

cover, attach it closely to
the refrigerator, then slide it
down.

NOTE

REMOVING THE FRIDGE ACCESSORIES

Spill Proof Glass Shelf

•

Pull the shelf out as far as it will go. Then lift it up and

gently remove it.

Foldable Shelf

❶

Slide the glass shelf (

) under the glass shelf (

❷

Tilt up the glass shelves (

) as shown below and lift up the

shelves with both hands.

❸

Hold the raised glass shelves (

) and pull out with care.

Vegetable & Fruit Drawer

•

Remove the drawer by holding the handle, pulling the drawer out, and then lifting up the side of the
drawer bottom smoothly with the other hand.

Gallon Door Bin

•

Hold the bin with both hands and remove it by lifting it up.

NOTE

• Before removing the freezer and fridge accessories, please remove the food.

NOTE

• When you replace the Foldable Shelf, follow the above instructions in reverse.

❶

❷

❸

DA99-01418B(0.0) 2007.7.21 8:28 AM 페이지13 in

Summary of Contents for RM25JWSH









































Search results

Summary of Contents for RM25JWSH

Reviews:

Related manuals for RM25JWSH

Brands by name

Popular brands

Samsung RM25JWSH, Owner'S Manual And Installation

Search results

Summary of Contents for RM25JWSH

Reviews:

Related manuals for RM25JWSH

Brands by name

Popular brands