18
REVERSING THE DOOR SWING
• Check that the power plug is correctly connected.
• Is the temperature control on the front panel correctly set?
• Does sun shine on the appliance or are there heat sources nearby?
• Is the back of the appliance too near to the wall?
The appliance is not operating at all or the temperature is too high
• Is the temperature control on the front panel set to the coldest temperature?
• Is the surrounding temperature too low?
• Did you put the hot food in the refrigerator?
The food in the refrigerator is frozen
• Check that the appliance is installed on a stable, level floor.
• Is the back of the appliance too near to the wall?
• Have any foreign objects fallen behind or under the appliance?
• Is there noise coming from the compressor in the appliance?
• A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the
various accessories contract or expand.
•
Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming.
When the surrounding temperature rises, this may not always be effective. However, this is not abnormal.
• In very humid weather, condensation may form on the outer surface of the appliance when the
moisture in the air comes into contact with the cool surface of the appliance.
The front corners and sides of the appliance are warm and condensation starts to form
PROBLEMS AND SOLUTIONS
There are unusual noises
29. Detach the Fridge and Freezer gaskets and attach them
after rotating 180˚. (Make sure the door gaskets are
properly arranged. If not, there can be a noise or dew
can be formed which affects perfomance of the unit.)
26. Switch the position of the
CAP HOLE HINGE UPP.
30. Make sure the doors are working
properly.
27. Reconnect the electric wires and
reposition the wires inside of the
CAP CABI as shown below.
28. Reassemble the CAP
CABI after assuring the
position of Wires.
CAP HOLE HINGE
DA99-01220X.indb 18
2010.8.6 9:47:34 AM
