USING THE WATER DISPENSER
(Only available on some models)
13
INSTALLING A REGULAR BOTTLE
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
Remove the water supply device from the
exclusive water tank, then set the inner groove
of the water supply device in a regular mineral
water bottle and fix‑it in position by turning it.
Turn the water supply device over, then fix‑it in
position in the fixing hole.
• Gurgling sounds may be heard when air enters the water bottle from regular mineral
water or beverage bottles.
• Some regular mineral water or beverage bottles may not fit the water supply device,
depending on their size.
• If water does not come out satisfactorily when you press the “push” lever, press it again.
• Do not use carbonated drinks, such as coke, cider or sodas. When you press the button,
the beverage may spurt out due to the pressure of carbonic gas accumulated in the upper
part of beverage bottle.
• For better hygiene, beverages with a high sugar content (juice, soft drinks) are not
recommended.
• You can use bottled mineral water or boiled tap water unless it does contain any particles.
Note
CLEANING THE WATER DISPENSER
Connection path
Wipe out the connection path and surrounding area with a clean damp cloth.
Dispenser Tray
Pull out the tray with fingers.
Empty the water in the dispenser tray, then clean it using warm water and detergent.
WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWINGS ARE RECOMMENDED
FILLING THE WATER TANK
DA99-01220X.indb 13
2010.8.6 9:47:28 AM
