operating
_25
02
OPERA
TING
reversing the door (optional)
REVERSING THE DOOR
(OPTIONAL)
Before you reverse the refrigerator door, make
sure to unplug the refrigerator. Samsung
recommends that reversing of the door opening
is only completed by Samsung approved Service
providers. This will be on a chargeable basis and at
the customers expense.
Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures
warranty.
Any repairs requested due to this
circumstance will be completed on
a chargeable basis at the customers
expense.
1. Before attempting to reverse the refrigerator
doors ensure that the refrigerator is
disconnected from the main electricity supply
and all food stuffs are emptied from inside the
appliance.
2. If the customer does not feel confident to follow
instruction in the user manual, a Samsung
qualified service engineer must be contacted to
carry out this change.
3. Do not plug in Refrigerator just after door
reverse finished process and wait for at least
one hour.
Required Tools
Not provided
Phillips Head
Driver (+)
Flat Head Driver
(-)
11 mm Wrench
(for hinge shaft)
Not provided
Additional part
8 mm Socket
Wrench
(for bolts)
Hinge Cover / Cap Space Door
Disassembly of the refrigerator door
1. Remove the Cover Wire Door.
Cover Wire Door
* RB37* model only
Cover Wire Door
2. Disassemble the Cap space Door.
Cap space Door
* RB37* model only
Cap space Door
3. Remove the Cover Hinge to push a hook like
below Pictures.
• Insert a flat-head screwdriver and put it back as
shown in Figure #1.
• As shown in Figure #2, Lever up the cover and
push a hook as shown in Figure #3.
(Take care not to damage the CoverHinge Wire
by pushing it too hard)
• Disassemble it by pushing the A in Figure #4 by
hand as Figure #5.
DA68-02833A (EN)-18.indd 25
2017. 7. 26. �� 1:31
