24_
operating
REMOVING THE INTERIOR PARTS
When assembling, put fridge shelves in
the correct position and do not put them
upside down. It may cause a personal
injury or material damage.
When you put the shelves back, make
sure the side with the label “Front” on it
face the front of the refrigerator.
Shelves
Gently lift up the shelves
with both hands and pull it
toward you. (Glass shelf)
Do not put the
shelves upside down or backwards.
There is a risk of falling.
Door guards
Firmly grab the door guards
with both hands and lift it
up gently to remove the
door guards.
Water tank
Lift up the Can Carry and
then firmly grab the water
tank with both hands and
lift it up towards you gently
to remove the water tanks.
Water tank may not be available
depending on the model.
CAUTION
CAUTION
Drawers
Pull the drawers out fully
then slightly lift it up to
remove the drawers.
• If the drawers get
stuck to door, remove drawer by lifting up after
remove shelves.
CLEANING THE REFRIGERATOR
Do not use Benzene, Thinner or Clorox™
for cleaning.
They may damage the surface of the
appliance and can create a risk of fire.
Do not spray the refrigerator with water
while it is plugged in, as it may cause
an electric shock. Do not clean the
refrigerator with benzene, thinner or car
detergent for risk of fire.
1. Unplug the power cord of the refrigerator.
2. Slightly dampen a soft lint-free cloth or paper
towel with water.
Do not use any kind of detergent to clean
the refrigerator because that can discolor
or damage the refrigerator.
3. Wipe the inside and outside of refrigerator until
it is clean and dry.
4. Plug the power cord of the refrigerator.
When water dispenser
do not come out
water, push on top of
the water tank down
slightly.
REPLACING THE LED LAMP
When the interior or exterior LED lamp has gone
out, do not disassemble the lamp cover and LED
lamp by yourself.
Please contact your service agents.
WARNING
CAUTION
DA68-02833A (EN)-18.indd 24
2017. 7. 26. �� 1:31
