SENS Q40 < 4 - 6 >
4. Disassembly and Assembly
Part
Picture
Description
LCD
1. Removing the Rubber Foot(4EA).
(
Caution : be careful occuring the
any scratch.)
2. Remove the screws(4EA) indicated at
picture
3. Lift the LCD front(downward direction)
up slowly from the bottom end by using
your hand.
.
4. Remove the Screws(4EA) which
assembled LCD Hinge and screw(2EA)
which assembled LCD inverter board
and screw(1EA) which assembled LCD
cable ring.
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.
Summary of Contents for RIMINI NP-Q40
