English - 17
2. Adjust the height difference between the doors
by turning the bolt (
2
) clockwise (
) or
counter clockwise (
).
(2) Bolt
(3) Wrench
When you turn clockwise (
), the
door will move up.
3. After adjusting the doors, turn the nut (
1
)
clockwise (
) until it reaches the lower
end of the bolt, then tighten the bolt again with
the wrench (
3
) to fix the nut in place (
1
).
(2) Bolt
(1) Nut
(3) Wrench
If you do not secure the nut firmly, the bolt
may release.
MAKING MINOR ADJUSTMENTS
BETWEEN THE SHOW CASE AND
INNER CASE OF THE FRIDGE
After raising the out door, insert the supplied SHIM
HINGE MIDDLE in the gap between the Show
case of fridge and the HINGE-SHAFT.
The SHIM HING MIDDLE is included with
the refrigerator. The thickness of the SHIM
is 1 mm.
CAUTION
Don’t make the Show Case door higer than Inner
Case door.
- The Show Case can break away from
STOPPER (HINGE )
DA68-02981J-00.indb 17
14. 11. 6. �� 2:05
SETTING UP
