Confidential
Chapter 1
Before Installation
RFV01U-D2A Installation Manual v2.0
8
Copyright © 2017, All Rights Reserved.
Installation Tools
The basic tools required for installation are listed in the following table. The
additional tools required for each site need to be identified and arranged during a
site survey before starting installation.
Table 2. Basic Installation Tools
No.
Name
Specification
Purpose of use
1 Torque
Driver
Apply a torque range
: 2 to 10 lbf·in
For fastening finger guard (M3).
Apply a torque range
: 20 to 90 lbf·in
For fastening RRH ground pressure
terminal (M5 and M6).
2 Screw
Driver
Bit
‘+’, No. 2
For fastening finger guard (M3 and
M5).
‘+’, No. 3
For fastening RRH ground pressure
terminal (M6).
3 Screw
Driver
‘+’, No. 2
For loosening M3 and M5 screws.
‘+’, No. 3
For loosening M6 screws.
4 Torque
Wrench
Apply a torque range
: 10 to 50 lbf·in
For tightening M6 Hex. Bolt and RF
connector of system (4.3-10 type).
Apply a torque range
: 100 to 400 lbf·in
For tightening M10 Hex. Bolt and RF
connector of antenna (DIN type).
5
Torque Wrench Spanner Head
Apply Hex. Bolt Head: 10 mm
(for 10 to 50 lbf·in)
For tightening M6 Hex. Bolt.
Apply Hex. Bolt Head: 17 mm
(for 100 to 400 lbf·in)
For tightening M10 Hex. Bolt.
Apply Hex. Bolt Head: 22 mm
(for 10 to 50 lbf·in)
For tightening RF connector of
system (4.3-10 type).
Apply Hex. Bolt Head: 32 mm
(for 100 to 400 lbf·in)
For tightening RF connector of
antenna (DIN type).
6 Spanner
10 mm
For loosening M6 Hex. Bolt.
17mm
For loosening M10 Hex. Bolt.
22 mm
For loosening RF connector of
system (4.3-10 type).
32mm
For loosening RF connector of
antenna (DIN type).
7 Ratchet
Wrench
10 × 13/17 × 19 (4 in 1)
For fastening Hex. Bolt.
8 Tape
Measure
16 ft./150 ft.
Tape measure for length
measurement.
9
Power Extension Cable
100 ft.
Basic tool.
