Chapter 3 Connecting Cables
RFD01F Series Installation Manual v1.0
76
© Samsung Proprietary and Confidential
To connect RF cable using JMA Boots
1
Make sure that operator has the following items:
Table 26. Parts and Tools for connecting RF cable
Category
Description
Installation
Section
RRU ANT0, ANT1, ANT2, ANT3 ~RF Antenna
Cable
RF Cable Assembly (1/2 in. Feeder Line)
Connector
RRU
DIN Type-Male, Straight
RF antenna
DIN Type-Male (Check the RF antenna specification and
prepare connecting parts.)
Recommended
Torque Value
RRU
217 lbf
·
in
RF antenna
217 lbf
·
in
Working Tools
Torque Wrench(100~400 lbf
·
in), Spanner Head(Hexagon Head: 1.25 in.(32 mm)),
Spanner(Hexagon: 1.25 in.(32 mm))
2
Install RF cable assembly from the RRU ANT0, ANT1, ANT2, ANT3 ports to
the RF antenna. (There are JMA boots on both sides of the RF cable assembly.)
Figure 70. RF Cable Connection using JMA Boots (1)
3
Connect the connector assembled at the end of RRU side’s cable to the
ANT_0, ANT_1, ANT_2, ANT_3 ports.
RF Cable Assembly
[RF Antenna]
[Bottom View]
