English - 30
( 6 )
Ice Off (Hold 3 sec for Child Lock)
The Ice Off button serves two purposes:
- To turn the Ice maker on and off
- To turn the Child Lock Function on and off.
1. Ice Off Function
If you don’t want to make more ice, press the Ice
Off button.
2. Child Lock Function
Touch and hold this button for 3 seconds to
lock the display, the Flex Zone panel, and the
dispenser buttons so the buttons can not be
used.
When the Child Lock is on, the refrigerator does
not dispense ice or water even if you press the
Dispenser Lever.
The child lock icon lights up to indicate you’ve
activated the child lock function.
Press 3 seconds to unlock.
( 7 )
Cubed Ice
( 8 )
Crushed Ice
Press the Cubed Ice or Crushed Ice button to
select the type of ice you want dispensed.
Each time you press the button, the cubed and
crushed ice modes alternate and the Cubed
or Crushed ice icon lights up, indicating your
selection.
( 9 )
Ice Off Icon
The Ice Off icon lights when you press the Ice Off
button (6) and turn the Ice-Maker off.
We recommend you stop ice making if
the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and the
water line is not connected, there will be
a water valve noise from the back of the
unit. If this occurs, press the Ice Off (Hold
3sec for child lock) button for less than 3
seconds until the Ice Off Indicator ( )
illuminates.
To save electricity, the Panel Display turns off
automatically under the following conditions: When
no button has been pressed, when no doors
are open, or when no Dispenser Lever has been
pushed.
However, the icon indicating your cubed or
crushed ice selection will stay on.
When you press a button, open a door, or push
a Dispenser Lever, the Panel Display will turn on
again.
All function keys, except Energy Saver and the
Cubed and Crushed keys will become operational
after you remove your fi nger from the button you
pressed.
( 10 ) Filter Icon
Water fi lter usage
This icon lights up when you need to change the
fi lter, usually after the refrigerator has dispensed
about 300 gallons of water (after about 6
months).
The icon will blink red for several seconds when
you open or close the door.
After you install the new water fi lter, reset the
fi lter indicator by touching and holding the Hold
3sec for Filter Reset button for 3 seconds.
- If water is not dispensing or
dispensing slowly, you need to replace
the water fi lter because the water fi lter
is clogged.
- Some areas have large amounts of
lime in their water, which causes the
water fi lter to clog more quickly.
Cooling Off Mode
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they
are displaying refrigerators on the shop
fl oor.
In Cooling Off mode, the refrigerator’s
fan motor and lights work normally, but
the compressors do not run, and the
refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Energy Saver button and the Freezer
button for 5 seconds during normal
operation.
The refrigerator chime sounds and the
temperature display fl ashes OFF.
To cancel Cooling Off mode, touch and
hold the Energy Saver and the Freezer
buttons again for 5 seconds.
DA68-03030C-01.indb 30
DA68-03030C-01.indb 30
2015. 5. 7.
8:28
2015. 5. 7.
8:28
