Installation
English
32
Ins
tallation
STEP 2
Flooring
If the refrigerator cannot pass through the entrance due to its size, see
.
NOTE
To prevent floor damage, make sure the
front levelling legs are in the upright
position.
• The surface you install the refrigerator
on must support a fully loaded
refrigerator.
• To protect the floor, put a large piece
of cardboard along the path to the
refrigerator's final installation location.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to move the refrigerator, place
thick paper or cloth such as old carpets
along the path of movement.
STEP 3
Door removal for entrance
If the refrigerator cannot pass through the entrance to your home or kitchen due to its
size, follow these instructions to remove and then re-install the refrigerator's doors. If you
do not need to remove the doors, go to page
to continue the installation procedure.
WARNING
Unplug the power cord of the refrigerator before removing the doors.
Tools required (not provided)
Phillips screwdriver
Flat-heat screwdriver
Socket wrench 10 mm
Pliers
Allen wrench 5 mm
Untitled-5 32
2021-06-22 5:15:41
Summary of Contents for RF28R7351SR
Page 1: ...Refrigerator User manual Free Standing Appliance Untitled 5 1 2021 06 22 5 15 39 ...
Page 83: ...Memo Untitled 5 83 2021 06 22 5 15 51 ...
Page 173: ...Notas Untitled 6 89 2021 06 22 5 18 46 ...
Page 174: ...Notas Untitled 6 90 2021 06 22 5 18 46 ...