ChANGING ThE WATER FIlTER
The “Filter Indicator” light lets you know when it is time to change your water filter cartridge. To give you
preparation time to get a new filter, the red light will come on just before the capacity of the current filter runs
out. Changing the filter on time provides you with the freshest, cleanest water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months in the future. For example, if you are replacing
the water filter in March, put the “SEP” (September) sticker on the filter to remind you to replace in
September. Normal filter life is about every 6 months.
2. Remove the new filter’s protective cap and remove the old filter.
3. Position and insert the new filter into the filter housing. Slowly turn the water filter clockwise to
align with the printing mark on the cover, locking the filter in position. Make sure to align the water
filter label mark with the center of cover filter printing as illustrated. Remember, do not over-
tighten.
Sticker
(month indicator)
Turn until the
labels are aligned.
Cover filter
4-1. Once you have completed this process, press and hold the Ice / Water button for 3 seconds to
reset the filter schedule. (Optional)
4-2. Once you have completed this process, hold the Power Cool button simultaneously for
3 seconds to reset the filter schedule. (Optional)
5. Lastly, run about 3L through water dispenser and throw away. Make sure that water flows clearly
again before drinking.
Be sure to flush the dispenser thoroughly otherwise water may drip from the dispenser. This
means that there is still air in the line.
Do NOT use the water or ice dispenser without a water filter cartridge because the water line
may become blocked.
Orderingreplacementfilters
To order more water filter cartridges, contact your authorized Samsung dealer.
Operating
_
02 OPERATING