1. If you open the drawer (
), you can see the lower hinge (
).
2. Insert the supplied hex wrench (
) into the shaft (
) of the lower hinge.
3. Please adjust the height turning the hex wrench (
) clockwise(
) or
counter-clockwise (
).
When you turn the hex wrench counter-clockwise(
), the door will move up.
4. After adjusting the doors, please insert the supplied fastener-ring (
) using a pair of pliers (
) in
the gap between the hinge-grommet (
) and the lower hinge(
). The number of fastener-rings
you’ll need to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 1mm(0.04 inch).
ADJUSTING ThE FREEZER DRAWER lEVEl
Adjustment part
Freezer Drawer
1. Locate the height-adjuster (
) in the freezer drawer.
Unscrew the four Phillips screws (
) slightly to loosen the door.
2. Loosen the controller screw(
) with a Phillips screwdriver.
SettingUp
_
01 SETTING UP