English - 23
02
OPERA
TING
USING THE ONE LEVER
DISPENSER
Push the appropriate ice type
button to select what you want
dispensed.
NO ICE
Select this if you want
to turn ice maker off
Using the ice Dispenser
Place a glass underneath
the ice dispenser and push
gently against the dispenser
lever with your glass.
Make sure the glass is in line
with the dispenser to prevent
the ice from bouncing out.
•
To select water, press the water button on the
display, and then press the dispenser lever.
•
To select Ice, press the ICE type button of
your choice on the display, and then press the
dispenser lever.
•
If you have selected cubed ice, when you
press the lever, the dispenser may dispense a
small amount of crushed ice first.
•
If ice doesn’t come out, pull out the ice bucket
and press the test button located on the right
side of ice maker.
check
the water
level
Test button
•
Do not press the test button continuously
when the tray is filled with ice or water. Water
may overflow or ice may jam the bucket.
•
When you press the Test button, you will hear
the refrigerator chime (ding-dong). When the
chime sounds, release the Test button.
•
The chime sounds automatically again to let
you know the ice maker is working well.
•
Replace the ice bucket.
Ice Making
To fill the ice bucket to maximum capacity after
installation, follow these steps:
1.
Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2.
Dispense 4 to 6 ice cubes into the glass.
3.
After 8, and then 16 hours, dispense a full
glass of ice.
CAUTION
•
To clean the ice bin/bucket, wash with a mild
detergent, rinse well, and dry thoroughly it. Do
not use harsh or abrasive cleaners or solvents.
•
When you select Cubed Ice after using the
Crushed Ice mode, a small amount of residual
crushed ice might be produced.
DA68-02601G-00.indb 23
2014. 12. 4. �� 3:05
