English - 12
5.
Remove the screw (
8
) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
9
)
attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove
the lower left and right door hinges (
10
).
Allen wrench
10
8
9
RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1.
The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
Center of Transparent coupler
The Guide Lines
Dispenser
clip A (1/4”)
(6.35 mm)
clip A (1/4”)
(6.35 mm)
Type A
Type B
2.
Insert the clip in the install pack and check that
it holds the line firmly.
DISASSEMBLING THE FLEX
DOOR
1.
Take out the Flex Zone (
1
) by lifting it up.
1
2.
Take off the cover (
2
) w/harness with a flat-
blade screwdriver (-).
2
3.
Press the locking tab and separate the Wire
Connector.
CAUTION
When reassembling it, be sure to connect the wire
harness.
If it is not connected, the Flex Room does not
work.
DA68-02601G-00.indb 12
2014. 12. 4. �� 3:05
