English - 18
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Pliers
Allen wrench
(3/16”) (5 mm)
With the door opened
1. Remove 3 screws holding down the TOP
TABLE (
1
) and separate the connected wires.
(1)
2. Disconnect two connectors (
2
) on the left side
door.
To remove the water coupler from the hinge,
twist and pull it from the hinge.
Remove the water line (
3
) while pressing the
marked part (
4
) of the water line coupler.
(2)
(3)
(4)
3. Pull and remove the hinge lever (
5
).
Remove the ground screw (
6
) attached to the
upper left door hinges with a philips screwdriver
(+). Remove the upper left and right door
hinges (
7
).
(5)
(7)
(6)
4. Lift the door straight up to remove.
5. Remove the screw (
8
) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts (
9
) attached to
the lower left and right door hinges with an allen
wrench (3/16”).
Remove the lower left and right door hinges
(
10
).
Allen wrench
(10)
(8)
(9)
DA68-02954H (EN)-03-���.indd 18
2018. 2. 1. �� 3:48
