Installation
English
34
Ins
tallation
8.
Insert the supplied wrench into the
handle hole, and then turn it clockwise
to tighten.
STEP 7
Connect the water dispenser line
A water dispenser with a filter is one of the helpful features on your new refrigerator. To
help promote better health, the water filter removes unwanted particles from your water.
However, it does not sterilize or destroy microorganisms. You may need to purchase a
water purifying system to do that.
The water line also connects to the ice maker. For the ice maker to operate properly, water
pressure must be between 20 and 125 psi (138 and 862 kPa).
If the refrigerator is installed in an area with low water pressure (below 20 psi / 138 kPa),
you can install a booster pump to compensate for the low pressure.
After you have connected the water line, make sure the water storage tank inside the
refrigerator is properly filled. To do this, press the water dispenser lever until water runs
from the water outlet.
NOTE
• Water line installation kits are available at extra cost from your retailer. We recommend
using a water line installation kit that contains copper tubing and a
1
/
4
" (6 mm)
compression nut.
A
B
C
1.
Shut off the main water source.
2.
Insert the
pipe clamp (B)
and the
shutoff
valve (C)
into the
cold water line (A)
.
Untitled-1 34
2021-06-22 4:44:25